GSP-1700 Molex Connector and Pinout
The GSP-1700 uses a CradleCon Molex 14-pin connector to interface to the car kit and to the data cable. This technical note provides the pinout of the connector, as well as part numbers and drawings of the jack and plug.
Pinout:
GSP1700 USB Data Cable
Molex Pin | Description | USB Pin |
1 |
USB Power (USB_VBUS) |
1 (V) |
2 |
Phone Detect (PHONE_DET) |
|
3 |
I2C Clock (I2C_SCL_FLT) |
|
4 |
USB D+ (USB_CONN_D_P) |
3 (D+) |
5 |
I2C Serial Data (I2C_SDA_FLT) |
|
6 |
Analog Ground (In House Kit Mode) (GND) |
|
7 |
USB D- (USB_CONN_D_M) |
2 (D-) |
8 |
VEXT |
|
9 |
VEXT |
|
10 |
Analog MIC+ (In House Kit Mode) (CK_MIC) |
|
11 |
USB/Power Ground (GND) |
4 (Gnd) |
12 |
Analog Speaker + (In House Kit Mode) (CK_EAR) |
|
13 |
Charge Detect (CHARGE_DET) |
|
14 |
Signal/Power Ground (GND) |
USB Data Cable Connector (end-view):
Image: (Click image for larger view)
Molex Plug:
Part Number: 54946-1409
Image: (Click image for larger view)
Molex Jack (internal to GSP-1700):
Part Number: 501054-1470
Image: (Click image for larger view)
Leave a Reply